2ND QTR 2010           •   •   • 
DATE HRS TTD ACTION IMAGES
04/09/10 0.7 1164.9 Oops, I missed another quarter with no plane work! Dang. After getting all the metal parts powdercoated I had to work on some home improvement projects, which will still be taking some time. However after talking to Phil about his canopy bushings and using oversize reamers to get the plastic bushings fitting good, I decided to try it. I ground the ends of the reamers to fit into some small sockets so I could turn them with a ratchet, getting the three right side bushings done; first with a 5/16 reamer, then a .001 oversize, then some careful hand file work. Using 5/16" reamer on canopy bushings Reaming .001 oversize Careful hand file work to get final fit Bushing with snug but not tight fit
QTR TOTAL XX.X  
 2ND QTR 2010           •   •   •