| 12/10/08 |
2.5 |
1000.2 |
After doing quite a bit of
research on the web learning about the process of powdercoating, I called the Kimball's powdercoater and
found out that they use TCI products urethane powder, 8000 series in
tropic gray. I decided to use the same product in white,
specifically TCI
8910-91065 Continental White Urethane Powder and bought a 55 lb. box
directly from TCI. I welded up the few pinholes in the
welds on the motor mount. I then took it and my 55 lb box down to
Fusion Coatings here in Livermore 925-443-8083 so they could p-coat the
mount.
|
 |
 |
•
•
•
